Regular Product
Showing 361–384 of 388 results
-
IC's
TDA7294 100V 100W DMOS Audio Amplifier (pack of 2)
Ask for Latest offer / Availability : https://bit.ly/3qBWOLE
- Very High Operating Voltage Range
- DMOS Power Stage
- High Output Power
- Muting and Stand-By Functions
- Very Low Distortion and Noise
- Short-Circuit Protected
- NO SWITCH ON/OFF NOISE
- NO BOUCHEROT CELLS
- THERMAL SHUTDOWN
SKU: n/a -
IC's
TL072 – Low Noise Dual JFET Op-Amp (pack of 10)
Ask for Latest offer / Availability : https://bit.ly/3izzJXl
- Low Power Consumption
- Wide Common-Mode and Differential Voltage Ranges
- Low Input Bias and Offset Currents
- Output Short-Circuit Protection
- Low Total Harmonic Distortion 0.003% Typ
- Low Noise
- Vn = 18 nV/√Hz Typ at f = 1 kHz
- High Input Impedance . . . JFET Input Stage
- Internal Frequency Compensation
- Latch-Up-Free Operation
- High Slew Rate . . . 13 V/µs Typ
- Common-Mode Input Voltage Range Includes VCC+
SKU: n/a -
Arduino Display
TM1637 4 Bits Digital Tube LED Display Module With Clock Display for Arduino
Ask for Latest offer / Availability : https://bit.ly/3aYwdmW
- Easy to use
- Ease of multiplexing.
- Can use as a 4 digit display unit.
- Can use as a clock display.
- DIY clock project.
- 4 digit display unit.
- Electrical/Electronic projects.
SKU: PGI-0043988 -
IC's
TNY268PN – TinySwitch-II (pack of 5)
Ask for Latest offer / Availability : https://bit.ly/2Y2gFYn
- Operating Temperature Range:- 40 C to + 150 C
- Mounting Style:Through Hole
- Package / Case:DIP-8
- No.of Pins: 7
- Maximum Operating Temperature:+ 150 C
- Minimum Operating Temperature:- 40 C
- Number of Outputs:1
- Type: Off Line Switcher
SKU: n/a -
IC's
TNY280PN – AC/DC Switching Converters (pack of 5)
Ask for Latest offer / Availability : https://bit.ly/3pll3Od
- Mounting Style:Through Hole
- Package / Case:DIP-8
- No.of Pins: 7
- Maximum Operating Temperature:+ 150 C
- Minimum Operating Temperature:- 40 C
- Number of Outputs:1
- Type: Off Line Switcher
SKU: n/a -
Arduino Sensors, Prayog Blaster
Touch Sensor Switch Module
Ask for Latest offer / Availability : https://bit.ly/30PiLfi
- Main chip: LM393
- Working voltage: for DC 5V
- Single-channel signal output
- Low-level output signal used for human body touch sensor alarm
- Adjustable sensitivity
- Pin Connector to board: 4 Pins
SKU: PGI-00699624 -
-
Servo Motor
TowerPro MG996R Digital High Torque Servo Motor
Ask for Latest offers/availability : https://bit.ly/3sW4MR9
- Weight: 55g
- Dimension: 40.7×19.7×42.9mm
- Stall torque: 9.4kg/cm (4.8v); 11kg/cm (6.0v)
- Operating speed: 0.19sec/60degree (4.8v); 0.15sec/60degree (6.0v)
- Operating voltage: 4.8 ~ 6.6V
- Gear Type: Metal gear
- Dead band width: 1us
- Wire length: 32cm
SKU: PGI-00618530 -
-
-
-
-
-
-
-
Prayog Blaster
UNO Proto Shield prototype expansion board with SYB-170 mini breadboard
Ask for Latest offer / Availability : https://bit.ly/3qLD6wI
- It has a nice standard 0.1″x0.1″ prototyping grid with big pads
- Comes with Stacking headers and plain header, choose whichever you want when soldering together
- An IC pattern for adding DIP ICs up to 20 pins
- Power rails down the middle and sides
- A reset button and an extra general use button
- Two 3mm general use LEDs, red and green, as well as 2 matching resistors
SKU: PGI-0028256 -
Arduino Boards
UNO R3 CH340G ATMega328P compatible with arduino + Cable + Transparent Acrylic Case For Uno R3
Arduino BoardsUNO R3 CH340G ATMega328P compatible with arduino + Cable + Transparent Acrylic Case For Uno R3
Ask for Latest offer / Availability : https://bit.ly/2NAivy1
- A basic Arduino Kit including everything to get started.
- It includes a quality proven Arduino Cable.
- It includes a strong and sturdy Transparent Acrylic Case.
- Microcontroller ATmega328 (SMD) – Interface CH340G
- Operating Voltage: 5V
- Input Voltage (recommended): 7-12V
- Digital I / O Pins 14 (of which 6 provide PWM output)
- Analog Input Pins: 6
SKU: PGI-0048065 -
-
-
Current and Voltage Sensor
Voltage Detection Sensor Module 25V
Ask for latest offers/availability : https://bit.ly/2VzFGcO
- Voltage input range: DC 0-25V
- Voltage detection range: DC 0.02445V-25V
- Voltage Analog Resolution: 0.00489V
- DC input connector: Terminal cathode connected to VCC, GND negative pole
- Output interface: “+” connect 5/3.3V, “-” connect GND, “s” connect the Arduino AD pins
SKU: PGI-0029802
