Prayog Blaster
Showing 49–72 of 125 results
-
Motor Driver, Prayog Blaster
Cytron SmartDriveDuo-10 MDDS10 DC MOTOR DRIVER
Ask for Latest offer / Availability : https://bit.ly/3pTZPX6
-
Single power operation
-
Dual Channels means it can drive two brush motor independently, or mixed.
- Support Signed magnitude and Locked Anti-phase in PWM mode.
-
Two manual/test buttons for each channel.
-
Two output indicator LEDs for each channel.
-
Power, Error indicator, RUN status (Left and Right) LEDs
-
On board reset button to restart the MCU after changing operation mode.
-
Operating modes: RC (RC servo signal), Analog, PWM, simplified and packetized UART.
SKU: PGI-004565 -
-
Prayog Blaster, Water Flow And Level Sensor
DC 3-6 V Mini Micro Submersible Water Pump
Ask for Latest offer / Availability : https://bit.ly/3aXaN9S
- Operating Voltage : 2.5 ~ 6V
- Operating Current : 130 ~ 220mA
- Flow Rate : 80 ~ 120 L/H
- Maximum Lift : 40 ~ 110 mm
- Outlet Outside Diameter: 7.5 mm
- Outlet Inside Diameter: 5 mm
SKU: PGI-00301183 -
Prayog Blaster, Sensors
DC 6-36V Inductive 4mm PNP-NO Proximity Sensor Switch
Ask for Latest offers/availability : https://bit.ly/2POthkL
- Output Type: PNP-NO
- Red LED checks the state of the proximity sensor
- High repeated positioning accuracy
- High switching frequency
- Wide voltage range
- Antivibration, dust, water and oil prevention
- Reverse power protection, short circuit protection, directly connecting with PLC
- Can replace small switches and limit switches
SKU: PGI-0051925 -
Motors | Drivers | Actuators Categories, Plastic Gear Box Motor, Prayog Blaster
DC Motor – 10RPM – 12Volts
Motors | Drivers | Actuators Categories, Plastic Gear Box Motor, Prayog BlasterDC Motor – 10RPM – 12Volts
Ask for Latest offer / Availability : https://bit.ly/3bHlj49
- The metal gears have better wear and tear properties.
- Gearbox is sealed and lubricated with lithium grease and requires no maintenance.
- Although motor gives 10 RPM at 12V, motor runs smoothly from 4V to 12V and gives the wide range of RPM, and torque.
- The shaft has a hole for better coupling.
- Operating Voltage(V): 12
- Rated Torque(kg-cm): 7
- Stall Torque(kg-cm): 28
SKU: PGI-005643 -
Motors | Drivers | Actuators Categories, Plastic Gear Box Motor, Prayog Blaster
DC Motor – 3RPM – 12Volts
Motors | Drivers | Actuators Categories, Plastic Gear Box Motor, Prayog BlasterDC Motor – 3RPM – 12Volts
Ask for Latest offer / Availability : https://bit.ly/2MvBWYe
- The metal gears have better wear and tear properties.
- Gearbox is sealed and lubricated with lithium grease and requires no maintenance.
- Although motor gives 3 RPM at 12V, motor runs smoothly from 4V to 12V and gives the wide range of RPM, and torque.
- The shaft has a hole for better coupling.
- Operating Voltage(V): 12
- Rated Torque(kg-cm): 16
- Stall Torque(kg-cm): 60
SKU: PGI-004 -
Hardware & Tools, Prayog Blaster
Digital Caliper 150MM 6-inch with Display Screen
Ask for Latest offers/availability : https://bit.ly/2OJKwTT
- Electronic digital caliper Vernier
- An ideal tool digital Vernier caliper for a broad range of industrial and automotive applications made of hardened stainless steel
- Internal, external and height dimensions can be easily and accurately measured linear capacitive measuring system
- Zero setting in any position with a small locking thumb screw which locks the jaws in place
- With easy to read large LCD display handy conversion chart at the back
SKU: PGI-0079 -
Prayog Blaster, Sensors
Digital LDR Module
Ask for Latest offer / Availability : https://bit.ly/30puwJc
- LM393 based design.
- Can detect ambient brightness and light intensity.
- Adjustable sensitivity (via blue digital potentiometer adjustment).
- Output Digital – 0V to 5V, Adjustable trigger level from preset.
- LEDs indicating output and power.
- Operating Voltage: 3.3V to 5V DC.
- Operating Current: 15ma.
SKU: PGI-0029799 -
Prayog Blaster
Digital Multi Servo Tester ESC RC Consistency CCPM Master Speed Control
Ask for Latest offers/availability : https://bit.ly/3rh9acW
- Operating Voltage: DC 4.8-6V
- Offer 3 modes to check servos or ESC
- The Manual Mode allows you to turn the knob to different speeds and check the reaction time
- The Neutral mode makes the servo go back to the neutral point
- The Automatic ’’Window Wiper’’ Mode makes the servo swing like a window wiper in the largest angle possible
- Connect to up to 3 servos simultaneously
SKU: PGI-0014950 -
Prayog Blaster, Sensors
Digital Sensor TTP223B Module Capacitive Touch Switch
Ask for Latest offers/availability : https://bit.ly/3ce0NbB
- Power supply voltage(VCC): 2.0, 3, 5.5 V.
- Output high VOH: 0.8VCC V
- Output low VOL: 0.3VCC V
- Response time (touch mode) : 60 mS
- Response time (low power mode) : 220 mS
- Can replace the traditional touch of a button
- Four M2 screws positioning holes for easy installation
SKU: PGI-0031100 -
Motors | Drivers | Actuators Categories, Prayog Blaster
Ebike MY1016Z2 250W 360rpm Geared DC motor (GB)
Motors | Drivers | Actuators Categories, Prayog BlasterEbike MY1016Z2 250W 360rpm Geared DC motor (GB)
Ask for Latest offer / Availability : https://bit.ly/3aSfQIF
- Output Power: 250 Watt.
- Rated Voltage: 24V
- Rated Speed: 360 RPM
- Full load Current: ≤13.4A
- No load Current: ≤2.2A
- Torque Constant: 0.8 N.m (8.15 kg-cm).
SKU: PGI-006025 -
Prayog Blaster
GL No.12 830 Points Breadboard
Ask for Latest offers/availability :
- Distribution strip, Tie-point 200
- Terminal Strip, Tie-point 630
- Completely reusable Breadboard
- Brand new & high quality
- Breadboard power supply module, compatible with 5 V, 3.3 V
- 140pcs Solderless Breadboard Jumper Cable Lead Kit
- Hard Wire with Angled shape
SKU: PGI-0024441 -
Prayog Blaster, Sensors
HC-08 Bluetooth 4.0BLE Serial Port Module
Ask for Latest offers/availability : https://bit.ly/2MQ6gNe
- Frequency: 2.4GHz ISM.
- Protocol: BLE 4.0.
- Max transmitting power: max. 4dBm.
- Modulation System: GFSK.
- Serial Baud Rate: 1200 to 115200 bps.
- Reference Distance: 80 meters.
SKU: PGI-00456174 -
Prayog Blaster, Sensors
HC-SR501 PIR with Jumper at back for trigger
Ask for Latest offers/availability : https://bit.ly/3rr8l1o
- Wide Working Voltage Range: DC 4.5V- 20V
- Current Drain: <60uA
- Detection Angle: <140°
- Detection Distance: 3 to 7m (can be adjusted)
- Blockade time: 2.5s (Default)
- Work temperature: -20-+80°C
- Jumper for trigger.
SKU: PGI-00783270 -
Prayog Blaster, Sensors
Heart Rate Monitor Kit with AD8232 ECG sensor module – Good Quality
Ask for Latest offer / Availability : https://bit.ly/3t2uMKn
- Designed to extract, amplify, and filter small biopotential signals.
- Leads-Off Detection.
- Shutdown Pin.
- LED Indicator.
- Analog Output.
- 3.5 mm Jack for Biomedical Pad Connection.
SKU: PGI-0031464 -
Prayog Blaster, Tyres & Wheels
Heavy Duty 40mm Iron Free Casters wheel for Robo Fighting Champ
Ask for Latest offer / Availability : https://bit.ly/3bmi43k
- The wheels are made of high quality iron materials
- Wheel can be universal sliding, easy to use
- Wear-resistant, smooth, silence
- Ball bearings using in all joints, ball bearing bring a max loading capacity and long working live.
SKU: n/a -
Battery and Charger, Prayog Blaster, Quad Copter & Multi Rotors
IMAX B6 80W 6A Charger/Discharger 1-6 Cells
Battery and Charger, Prayog Blaster, Quad Copter & Multi RotorsIMAX B6 80W 6A Charger/Discharger 1-6 Cells
Ask for Latest offer / Availability : https://bit.ly/38iABvB
- Microprocessor controlled
- Delta-peak sensitivity
- Individual cell balancing
- LiIon, LiPoly, and LiFe capable
- NiCd and NiMH capable
- Large range of charge currents
- Storage charge function
- Time limit function
- Input voltage monitoring (Protects car batteries in the field)
SKU: PGI-003498 -
Prayog Blaster, Sensors
IR Receiving Head VS1838B Remote Control Receiver – 5pcs
Ask for Latest offers/availability : https://bit.ly/3elGNXn
- Internal filter for PCM frequency.
- Inner shield, good anti-interference ability.
- High immunity against ambient light.
- Improved shielding against electric field disturbance
- 3.0V or 5.0V supply voltage; low power consumption.
- TTL and CMOS compatibility.
- Suitable transmission code:NEC code,RC5 code.
- Universal receiver. 38 KHz.
- Infrared remote control receiver.
SKU: n/a -
IR And PIR Sensor, Prayog Blaster
IR Sensor Array with Obstacle and Bump Sensor Arduino compatible
Ask for Latest offer / Availability : https://bit.ly/3kRiQbK
- For Original Product Select SOLD AND FULFILLED BY INVENTO SALES
- Input voltage: 5V DC VCC, GND Pins.
- Output: 5 from TCRT5000 is S1, S2, S3, S4, S5 digital.
- Output: 1 from IR Obstacle sensor Near digital, 1 from Bump switch is CLP digital.
- Dimensions: Length: 11.8 cm. Width: 6 cm.
SKU: PGI-0051 -
Arduino Modules, Motors | Drivers | Actuators Categories, Prayog Blaster
L293D Motor Driver/Servo Shield for Arduino
Arduino Modules, Motors | Drivers | Actuators Categories, Prayog BlasterL293D Motor Driver/Servo Shield for Arduino
Ask for Latest offers/availability : https://bit.ly/3FBPqs6
- 2 connections for 5V ‘hobby’ servos connected to the Arduino’s high-resolution dedicated timer
- 4 H-Bridges: L293D chipset provides 0.6A per bridge (1.2A peak) with thermal shutdown protection, internal kickback protection diodes.
- Can run motors on 4.5VDC to 25VDC.
- Up to 4 bi-directional DC motors with individual 8-bit speed selection (so, about 0.5% resolution)
- Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil, or interleaved stepping.
SKU: PGI-009736 -
Motors | Drivers | Actuators Categories, Prayog Blaster
L298N Dual H Bridge DC/Stepper Motor Driver Controller Module
Motors | Drivers | Actuators Categories, Prayog BlasterL298N Dual H Bridge DC/Stepper Motor Driver Controller Module
Ask for Latest offers/availability : https://bit.ly/3kT4uaR
- Driver chip: L298N Dual H Bridge
- Supply voltage: VMS 5V – 35V
- Peak current IO: 2A per bridge
- Max power consumption: 20W
- Provides 4 LEDs that reflect the state of the control logic
- Independent direction, speed, and braking for each motor
SKU: PGI-0051971 -
Prayog Blaster, Sensors, Temperature and Humidity Sensor
LM35 TO-92-3 Board Mount Temperature Sensors
Prayog Blaster, Sensors, Temperature and Humidity SensorLM35 TO-92-3 Board Mount Temperature Sensors
Ask for Latest offers/availability : https://bit.ly/2O3hG0X
- Calibrated directly in Degree Celsius (Centigrade)
- Linear at 10.0 mV/°C scale factor
- 0.5°C accuracy guarantee-able (at a25°C)
- Suitable for remote applications
- Low cost due to wafer-level trimming
- Operates from 4 to 30 volts
- Less than 60 mA current drain
- Low self-heating, 0.08°C in still air
- Non-linearity only 0.25°C typical
SKU: PGI-00162126
