Motors | Drivers | Actuators Categories
Showing 1–24 of 162 results
-
Motor Driver
10A Motor Driver Shield – MD10
Ask for Latest offer / Availability : https://bit.ly/3zxFVa6
- Bi-directional control of 1 brushed DC motor.
- Support motor voltage ranges from 7V to 25V, .
- Maximum current up to 10A continuous and 15A peak (10 seconds).
- Solid state components provide faster response time and eliminate the wear and tear of a mechanical relay.
- Fully NMOS H-Bridge for better efficiency and no heat sink is required.
- Speed control PWM frequency up to 10KHz.
- Selectable digital pins for PWM and DIR.
SKU: PGI - 003408 -
Motors | Drivers | Actuators Categories, Plastic Gear Box Motor, Prayog Blaster
12 Volt DC Motor – 200 RPM
Motors | Drivers | Actuators Categories, Plastic Gear Box Motor, Prayog Blaster12 Volt DC Motor – 200 RPM
Ask for Latest offer / Availability :https://bit.ly/3dOYxKE
-
- Operating Voltage(V): 12
- Rated Speed (RPM): 200
- Rated Torque(kg-cm): 1.5
- Stall Torque(kg-cm): 5.4
- Load Current (A): 0.3
- No Load Current (A): 0.06
SKU: PGI-00139 -
-
Motors | Drivers | Actuators Categories, Plastic Gear Box Motor
12 Volts DC Motor – 500 RPM
Ask for Latest offer / Availability : https://bit.ly/3cI8aJK
- Operating Voltage(V): 12
- Rated Speed (RPM): 500
- Rated Torque(kg-cm): 0.7
- Stall Torque(kg-cm): 3
- No Load Current (A): 0.06
- Load Current (A): 0.3
SKU: PGI-00166 -
Bo Motor
150 Rpm Dual shaft High Quality Low noise Bo Motor 4 pcs + 4 pcs Gripped yellow Bo wheel
Ask for Latest offer / Availability : https://bit.ly/35EOQZI
- Low density: lightweight, low inertia.
- Capability to absorb shock and vibration as a result of elastic compliance.
- Ability to operate with minimum or no lubrication, due to inherent lubricity.
- The relatively low coefficient of friction.
- Operating Voltage(VDC): 3~12
- Shaft Length (mm): 8.5
- Shaft Diameter (mm): 5.5 (Double D-type)
- No Load Current: 40-180mA.
- Rated Speed(After Reduction): 150 RPM
- Rated Torque: 0.35 Kgcm
SKU: PGI-00167 -
Bo Motor, Motors | Drivers | Actuators Categories
150 RPM Dual Shaft Straight Plastic Gear BO Motor for Arduino/Raspberry-Pi/Robotics
Bo Motor, Motors | Drivers | Actuators Categories150 RPM Dual Shaft Straight Plastic Gear BO Motor for Arduino/Raspberry-Pi/Robotics
Ask for Latest offer / Availability : https://bit.ly/2Sat8JZ
- 150 RPM Dual Shaft Straight Plastic Gear BO Motor
- For Arduino/Raspberry-Pi/Robotics
- Gear materials: plastic
- Motor types: Permanent Magnet
- Brush-type: Brushed
- Magnet types: Ferrite Magnets
- Torque multiplication: Generates a large force at a low speed
SKU: PGI-00170 -
Bo Motor, Motors | Drivers | Actuators Categories
150 RPM Single Shaft Straight Plastic Gear BO Motor
Bo Motor, Motors | Drivers | Actuators Categories150 RPM Single Shaft Straight Plastic Gear BO Motor
Ask for Latest offers/availability : https://bit.ly/3httULu
- DIY Projects.
- Battery-operated toys.
- Disk drives Steel rolling mills Paper.
- Machines Medical equipment.
- Radio-controlled aircraft.
- Automobiles Drive systems Positioning.
- Industrial and consumer actuators Winches Robotics Mixers.
- Robotic projects.
SKU: n/a -
SERVO MOTORS AND ACCESSORIES
16-Channel 12-bit PWM/Servo Driver – I2C interface – PCA9685
Ask for Latest offers/availability : https://bit.ly/3nsChuL
- Operating voltage: 2.3V to 5.5V
- 5.5V tolerant inputs
- Can operate at minus 40 degrees Celsius to 85 degrees Celsius
- Software reset feature (SWRST Call) allows the device via I2C bus reset
- 25MHz internal oscillator requires no external components
- The maximum allowable 50MHz external clock input
SKU: PGI-0031364 -
Motors | Drivers | Actuators Categories, Servo Motor Driver
16-Channel 12-bit PWM/Servo Driver I2C interface PCA9685 for Arduino Raspberry Pi
Motors | Drivers | Actuators Categories, Servo Motor Driver16-Channel 12-bit PWM/Servo Driver I2C interface PCA9685 for Arduino Raspberry Pi
Ask for Latest offers/availability : https://bit.ly/3hjO8HG
- Adjustable frequency PWM up to about 1.6 KHz
- 12-bit resolution for each output – for servos, that means about 4us resolution at a 60Hz update rate
- Configurable push-pull or an open-drain output
- The output enable pin to quickly disable all the outputs
- Terminal block for power input
- Reverse polarity protection on the terminal block input
- Green power-good LED
SKU: PGI-0043740 -
-
Motors | Drivers | Actuators Categories, Prayog Blaster
28BYJ-48 Stepper Motor and ULN2003 Stepper Motor Driver – Good Quality
Motors | Drivers | Actuators Categories, Prayog Blaster28BYJ-48 Stepper Motor and ULN2003 Stepper Motor Driver – Good Quality
Ask for Latest offers/availability : https://bit.ly/3cgN0kG
- Rated voltage: 5V DC
- Reduction Ratio: 64:1
- Step Angle: 5.625° /64
- Frequency: 100Hz
- Self-positioning Torque: >34.3mN.m
- Friction torque: 600-1200 gf.cm
- Pull in torque: 300 gf.cm
SKU: PGI-0017304 -
Bo Motor
300 RPM BO Motor-Straight
Ask for Latest offer / Availability : https://bit.ly/3xzLUKw
- Low density: lightweight, low inertia.
- Capability to absorb shock and vibration as a result of elastic compliance.
- Ability to operate with minimum or no lubrication, due to inherent lubricity.
- The relatively low coefficient of friction.
- Operating Voltage(VDC): 3~12
- Shaft Length (mm): 8.5
- Shaft Diameter (mm): 5.5 (Double D-type)
- No Load Current: 40-180mA.
- Rated Speed(After Reduction): 300 RPM
- Rated Torque: 0.35 Kgcm
SKU: PGI-00103984 -
-
Bo Motor
300 RPM Dual Shaft BO Motor-Straight
Ask for Latest offer / Availability : https://bit.ly/3hRNHnp
- Low density: lightweight, low inertia.
- Capability to absorb shock and vibration as a result of elastic compliance.
- Ability to operate with minimum or no lubrication, due to inherent lubricity.
- The relatively low coefficient of friction.
- Operating Voltage(VDC): 3~12
- Shaft Length (mm): 8.5
- Shaft Diameter (mm): 5.5 (Double D-type)
- No Load Current: 40-180mA.
- Rated Speed(After Reduction): 300 RPM
- Rated Torque: 0.35 Kgcm
SKU: PGI-00104024 -
Motors | Drivers | Actuators Categories
4x DC 3.7V 716 7x16mm Micro Coreless Motor With Propeller High Speed Mini Drones
Motors | Drivers | Actuators Categories4x DC 3.7V 716 7x16mm Micro Coreless Motor With Propeller High Speed Mini Drones
Ask for Latest offers/availability : https://bit.ly/3FBvWUw
- Material: Metal+Plastic
- Color: Silver(Motor)+Propeller Color will be delivered randomly
- This is a rare motor, and the small motor torque is very large, which is the value of it.
- Note: when you install the propeller, press and hold the back of the motor to prevent damage to the motor. In order to prevent unnecessary loss, please buy another one for Spare, to prevent emergency
SKU: PGI - 0022127 -
Geared Motor
50 Rpm 6 mm center Shaft Motor, High Torque Gear Motor 10 kg Torque Motor
Ask for Latest offers/availability : https://bit.ly/3v0A0J0
- 10 kg torque
- 50 Rpm
- Motor Diameter 28.5 mm
- Length 63 mm without shaft
- Shaft length 30mm
- 180gm weight
- No-load current = 800 mA, Load current = upto 7.5 A(Max)
- 6mm shaft diameter with internal hole.
- Recommended to be used with DC Motor Driver 20A or Dual DC Motor Driver 20A
SKU: n/a -
Motors | Drivers | Actuators Categories
55 mm Blade Propeller Prop with 8520 CW & CCW Coreless Brushed Motor For Indoor Racing Drone Quad-copter
Motors | Drivers | Actuators Categories55 mm Blade Propeller Prop with 8520 CW & CCW Coreless Brushed Motor For Indoor Racing Drone Quad-copter
Ask for Latest offer / Availability : https://bit.ly/3yrgDtw
- Model: 8520
- Shaft Size: 1.0 mm
- Rated Voltage: 3.7 V.
- Rated RPM: 39000.
- Wire Length: 6cm
- Prop. Length: 55mm
- Prop. Material: Glass Fiber
SKU: PGI-0046614 -
Motors | Drivers | Actuators Categories
55mm Blade Propeller Prop with 615 CW & CCW Coreless Brushed Motor For Indoor Racing Drone Quad-copter
Motors | Drivers | Actuators Categories55mm Blade Propeller Prop with 615 CW & CCW Coreless Brushed Motor For Indoor Racing Drone Quad-copter
Ask for Latest offer / Availability :https://bit.ly/3jMYqSk
- Model: 615
- Shaft Size: 1.0 mm
- Rated Voltage: 3.7 V.
- Rated RPM: 60000.
- Wire Length: 6cm
- Prop. Length: 55mm
- Prop. Material: Glass Fiber
SKU: PGI-0046616 -
Motors | Drivers | Actuators Categories
55mm Blade Propeller Prop with 720 CW & CCW Brushed Motor For Indoor Racing Drone Quad-copter
Motors | Drivers | Actuators Categories55mm Blade Propeller Prop with 720 CW & CCW Brushed Motor For Indoor Racing Drone Quad-copter
Ask for Latest offer / Availability : https://bit.ly/3ioSE8I
- Model: 720
- Shaft Size: 1.0 mm
- Rated Voltage: 3.7 V.
- Current: 0.1 A.
- Rated RPM: 48000.
- Max Speed: 50000 RPM.
- Wire Length: 5cm
- Prop. Length: 55mm
SKU: PGI-0046615 -
Non-Geared Motor
6 volt Dc Motor, High Speed High Quality , Rc Toy and Car Motor
Ask for Latest offers/availability : https://bit.ly/3DokIka
- Motor housing (D x F x L): Ø20 x 15 x 25mm
- Material: SECD
- Shaft: 2.0mm carbon steel (nickel-coated)
- Commutation way: metal brushes
- Structure: 2-pole stators and 3-slot armature
- Rotation: CW/CCW and reversible
- Plastic end cap
SKU: n/a -
Non-Geared Motor
6 volt Dc Motor, High Speed High Quality , Rc Toy and Car Motor – 4pcs
Ask for Latest offers/availability : https://bit.ly/3Fzygvb
- Motor housing (D x F x L): Ø20 x 15 x 25mm
- Material: SECD
- Shaft: 2.0mm carbon steel (nickel-coated)
- Commutation way: metal brushes
- Structure: 2-pole stators and 3-slot armature
- Rotation: CW/CCW and reversible
- Plastic end cap
SKU: n/a -
Motors | Drivers | Actuators Categories
60 RPM BO Motor – Straight
Ask for Latest offer / Availability : https://bit.ly/3jWW9Er
- Low density: lightweight, low inertia.
- Capability to absorb shock and vibration as a result of elastic compliance.
- Ability to operate with minimum or no lubrication, due to inherent lubricity.
- The relatively low coefficient of friction.
- Operating Voltage(VDC): 3~12
- Shaft Length (mm): 8.5
- Shaft Diameter (mm): 5.5 (Double D-type)
- No Load Current: 40-180mA.
- Rated Speed(After Reduction): 60 RPM
- Rated Torque: 1 Kgcm
SKU: PGI-0025339 -
Motors | Drivers | Actuators Categories
65mm Blade Propeller Prop with 615 CW & CCW Coreless Brushed Motor For Indoor Racing Drone Quad-copter
Motors | Drivers | Actuators Categories65mm Blade Propeller Prop with 615 CW & CCW Coreless Brushed Motor For Indoor Racing Drone Quad-copter
Ask for Latest offers/availability : https://bit.ly/3oVm425
- Model: 615
- Shaft Size: 1.0 mm
- Rated Voltage: 3.7 V.
- Rated RPM: 60000.
- Wire Length: 6cm
- Prop. Length: 65mm
- Prop. Material: Glass Fiber
SKU: PGI-0046495 -
Motors | Drivers | Actuators Categories
65mm Blade Propeller Prop with 720 CW & CCW Brushed Motor For Indoor Racing Drone Quad-copter
Motors | Drivers | Actuators Categories65mm Blade Propeller Prop with 720 CW & CCW Brushed Motor For Indoor Racing Drone Quad-copter
Ask for Latest offers/availability : https://bit.ly/3mGnWsB
- Model: 720
- Shaft Size: 1.0 mm
- Rated Voltage: 3.7 V.
- Current: 0.1 A.
- Rated RPM: 48000.
- Max Speed: 50000 RPM.
- Wire Length: 5cm
- Prop. Length: 65mm
SKU: PGI-0046496
