Relay
Showing 49–66 of 66 results
-
Relay
ESP8266 10A DC 7-30V Network Relay WIFI Module
Ask for latest offers/availability : https://bit.ly/3biOrws
- With ESP8266 Wifi module,4-layers board design.
- Input overvoltage protection, input with TVS, when the voltage exceeds 33V,
- automatic protection will operate.
- Input overcurrent protection.
- 220V 10A relay, one normally open, one normally closed.
- One way optocoupler isolation input, TVS input protection.
SKU: n/a -
Relay
ESP8266 WiFi 5V 1 Channel Relay Module IOT Smart Home Remote Control Switch Android Phone APP Control Transmission Distance 400m
RelayESP8266 WiFi 5V 1 Channel Relay Module IOT Smart Home Remote Control Switch Android Phone APP Control Transmission Distance 400m
Ask for latest offers/availability : https://bit.ly/35Klp81
- Onboard Module: ESP8266 wifi module; in AP mode it can connect with 5 Clients at the same time
- Operating Way: cellphone carried on wifi module; cellphone and wifi module carried on the same router, and use the APP to control relay
- Transmission Distance : 400m (max)
- Relay : 5V,10A/250V AC 10A/30V DC
- Baud Rate: 9600.
- Diode effusion protection;
- Short response time
SKU: n/a -
-
Relay
NE555 Delay Monostable Switch Module Time Delay Switch Delay On Vehicle Electrical Delay 12V
Ask for latest offers/availability : https://bit.ly/3ckqia1
- Module based on the NE555 chip.
- Input voltage: DC 12V
- Adjustable time: 0-10 s
- AC Control voltage: 250V/max. 10A
- DC Control Voltage: 30V/max. 10A
- Max. load: 2200W
SKU: n/a -
Relay
NE555 Delay Monostable Switch Module Time Delay Switch Delay On Vehicle Electrical Delay 12V With optocoupletr
RelayNE555 Delay Monostable Switch Module Time Delay Switch Delay On Vehicle Electrical Delay 12V With optocoupletr
Ask for latest offers/availability : https://bit.ly/2WAojaY
- Timing from microseconds to long hours.
- Simple circuit design.
- Precision Pulse Generation / Timing.
- Adjustable Duty Cycle.
- Monostable Operation.
- Supply Voltage (V): 12
- Adjustable Time(s): 0 to 10
- AC Control Voltage(V): 0-250 @max. 10A
- DC Control Voltage(V): 0-30 @max. 10A
SKU: n/a -
Relay
Photosensitive Resistance Sensor Relay Module
Ask for latest offers/availability : https://bit.ly/3duNuCF
- Adjust the sensitivity with the potentiometer. Set the start relay threshold by adjusting the potentiometer.
- When it is brighter, the module relay pulls in.
- When the threshold is dark, the relay is disconnected.
- Operating Voltage: 3.3V – 5V.
SKU: n/a -
Relay
SeeedStudio Grove 4 Channel Solid State Relay
Ask for latest offers/availability : https://bit.ly/2zpgOvI
- Operating input voltage: 4~6V
- Rated Input Voltage: 5V
- Rated Load Voltage: 100 to 240 VAC 50/60 Hz
- Load Voltage Range: 75 to 264 VAC 50/60 Hz
- Load current: 0.1 to 2 A
- Leakage current: 1.5 mA max. (at 200 VAC)
SKU: n/a -
-
Relay
SmartElex Battle Relay
Ask for latest offers/availability : https://bit.ly/3fCwSuD
- Max current and voltage:
- 10A @ 125VAC
- 7A @ 240VAC
- Relay resistance: 100 mΩ max
- 4.8V to 5.2V operating voltage
- 30mA typical draw from receiver
- Powerful auxiliary weapons control in RC combat.
- Glow plugs control in RC nitro vehicles.
SKU: n/a - Max current and voltage:
-
Relay
SmartElex Dual Channel Battle Relay
Ask for latest offers/availability : https://bit.ly/3fttvq1
- Max current and voltage:
- 10A @ 120VAC
- 7A @ 250VAC
- 10A @ 24VDC
- Relay resistance: 100 mΩ max
- Module operating voltage: 4.8V to 5.2V
- 30mA typical draw from receiver
- Powerful auxiliary weapons control in RC combat.
- Glow plugs control in RC nitro vehicles.
SKU: n/a - Max current and voltage:
-
Relay
Songle Single-channel 5V 30A Relay Module Power Failure Relay
Ask for latest offers/availability : https://bit.ly/2Leu0Gv
- Voltage version: 5V
- The static current: 5mA
- Working current: 190mA
- Trigger current: 2-4mA
- The module can be set high level or low-level trigger by the jumper
- Rated current of the interface is 16A
SKU: n/a -
Relay
USB Control 1 Channel Module 5V Relay Module
Ask for latest offers/availability : https://bit.ly/35JYxFy
- Contact type: NC / COM / NO
- Input current: ≥300mA
- Input voltage: DC 5V
- Support Win7, XP 32-bit systems
- Onboard square USB interface, stable connection.
- Use imported high-performance USB control chip.
- Application code: Green indicates that the relay is closed, the red disconnect
- Military grade PCB board production.
SKU: PGI-0031300 -
-
