Arduino
Showing 49–67 of 67 results
-
Arduino Modules
PL2303 PL2303HX USB To TTL(Serial) Converter Module – 5 Pin
- Adopt imported controller PL2303HX,which can stabilize the flash with high speed
- 500mA self recovery fuse for protection
- Two data transmission indicator can monitor data transfer status in real time
- Reserve 3.3V and 5V pin interface,easy for the DDWRT of different voltage system that need power
- The entire board is coated by high quality transparent heat-shrinkable sleeve,making the PCB in insulation state from outside,
- so that the board won’t burnt down by material short cut.
- Electrostatic package,insures the board will not be damaged before use
Support WIN7 system
SKU: PGI-0044534 -
Arduino Boards
Pro Mini ATMEGA328P 5V/16M Blue – Standard Version
- Microcontroller: ATmega328P
- Circuit Operating Voltage: 5V
- Clock frequency: 16MHz.
- 6 PWM ports: D3, D5, D6, D9, D10, D11.
- Use For Atmel Atmega328P-AU microcontroller.
- Support serial download.
- Support 9V battery.
- A pair of TTL level serial port transceivers: RX / TX.
SKU: PGI-00409791 -
-
Arduino Modules
RFID Reader/Writer RC522 SPI S50 with RFID Card and Tag
- Voltage: DC 3.3V (Do not use 5V supply)
- Operating Current :13-26mA
- Idle Current :10-13mA
- Operating Frequency: 13.56MHz
- Highly integrated analog circuitry to demodulate and decode responses
- Supports ISO/IEC 14443 A/MIFARE
- Typical operating distance in reading/Write mode up to 50 mm
SKU: n/a -
Arduino Accessories
SeeedStudio Grove Creator Kit – Beta (30 in 1 Sensor Kit)
Ask for Latest offer / Availability : https://bit.ly/39m4Qm8
- Carefully selected Grove sensors (input) and actuators (output)
- 30 different Grove modules in a kit
- All modules are packed in protective plastic bags
- Grove connector cables
- Comes with 107 colored pages printed book
- Compatible with:
i) Arduino, requires Grove Base Shield
ii) Raspberry Pi, requires GrovePi HAT
iii) micro:bit, requires BitMaker or BitMaker Lite.
SKU: PGI-00606589 -
Arduino Accessories
SeeedStudio Grove Creator Kit – Gamma (40 in 1 Sensor Kit)
Ask for Latest offer / Availability : https://bit.ly/3ca1xQS
- Carefully selected Grove sensors (input) and actuators (output)
- 40 different Grove modules in a kit
- All modules are packed in protective plastic bags
- Grove connector cables
- Comes with 107 colored pages printed book
- Compatible with:
i) Arduino, requires Grove Base Shield
ii) Raspberry Pi, requires GrovePi HAT
iii) micro:bit, requires BitMaker or BitMaker Lite
SKU: PGI-00606654 -
Arduino Modules
SIM800A Quad Band GSM/GPRS Module with RS232 Interface
- Quad-band 850/900/1800/1900MHz.
- GPRS class 2/10.
- Input Voltage : 9V-12V DC.
- Control via AT commands (3GPP TS 27.007, 27.005 and SIMCOM enhanced AT command set).
- Configurable baud rate.
- Built-in SIM Card holder.
- Built-in Network Status LED.
SKU: PGI-0034205 -
Arduino, Arduino Shield
SmartElex PS2 Sheild for Arduino
- Simple to use UART protocol
- Vibrator motor on PS2 is controllable.
- Wired and Wireless PS2 controller is supported.
- PS2 Controller will automatically operate in analog mode. (Default)
- A status LED
- Jumper selector to select different UART Baud Rate (74880 (Default), 9600, 57600, 115200). Default: – when no jumper is attached.
- Jumper selectors to select different digital pin as UART – TX and RX pin.
SKU: n/a -
-
Arduino Display
TM1637 4 Bits Digital Tube LED Display Module With Clock Display for Arduino
Ask for Latest offer / Availability : https://bit.ly/3aYwdmW
- Easy to use
- Ease of multiplexing.
- Can use as a 4 digit display unit.
- Can use as a clock display.
- DIY clock project.
- 4 digit display unit.
- Electrical/Electronic projects.
SKU: PGI-0043988 -
Arduino Sensors, Prayog Blaster
Touch Sensor Switch Module
Ask for Latest offer / Availability : https://bit.ly/30PiLfi
- Main chip: LM393
- Working voltage: for DC 5V
- Single-channel signal output
- Low-level output signal used for human body touch sensor alarm
- Adjustable sensitivity
- Pin Connector to board: 4 Pins
SKU: PGI-00699624 -
Arduino Boards
UNO R3 CH340G ATMega328P compatible with arduino + Cable + Transparent Acrylic Case For Uno R3
Arduino BoardsUNO R3 CH340G ATMega328P compatible with arduino + Cable + Transparent Acrylic Case For Uno R3
Ask for Latest offer / Availability : https://bit.ly/2NAivy1
- A basic Arduino Kit including everything to get started.
- It includes a quality proven Arduino Cable.
- It includes a strong and sturdy Transparent Acrylic Case.
- Microcontroller ATmega328 (SMD) – Interface CH340G
- Operating Voltage: 5V
- Input Voltage (recommended): 7-12V
- Digital I / O Pins 14 (of which 6 provide PWM output)
- Analog Input Pins: 6
SKU: PGI-0048065 -
Arduino Boards
Uno R3 compatible with Arduino + Cable + Transparent acrylic case for Uno R3
Ask for Latest offer / Availability : https://bit.ly/2SWkdbK
- A basic Arduino Kit including everything to get started.
- It includes a quality proven Arduino Cable.
- It includes a strong and sturdy Transparent Acrylic Case.
- Micro-controller : ATmega328
- Operating Voltage: 5V
- Input Voltage (recommended) : 7-12V
- Digital I/O Pins: 14 (of which 6 provide PWM output)
- Analog Input Pins: 6
SKU: PGI-0048057 -
-
Arduino Shield
Yun Shield V2.4
Ask for Latest offer / Availability : https://bit.ly/3qPOHLy
- Open source Linux (OpenWrt) inside
- Low power consumption
- Support Passive PoE Injector.
- Managed by Web GUI, SSH via LAN or WiFi
- Software upgradeable via network
- Built-in web server
- Support internet connection via LAN port, WiFi or 3G dongle.
- Support USB flash to provide storage for Arduino projects.
- Failsafe design provides a robust system.
- Compatible with Arduino Leonardo, Uno, Duemilanove, Diecimila, Mega, Due, Teensy,
- Compatible with Arduino IDE
SKU: PGI-00127767
