3D Accessories, Motors | Drivers | Actuators Categories
HD Planetary DC Geared Motor 438 RPM 29.5N-CM 12V with Encoder3D Accessories, Motors | Drivers | Actuators Categories
HD Planetary DC Geared Motor 438 RPM 29.5N-CM 12V with Encoder
Ask for Latest offers/availability : https://bit.ly/3zIa31r
- Base Motor: 6000 rpm.
- No load current: 320mA.
- Load current: 1450mA.
- Load Torque: 29.45N.cm.
- Stall torque: 231N.cm.
- Stall current: 9.3A.
MGN12H Linear Guide Rail – 0.5M with Sliding block
Ask for Latest offer / Availability : https://bit.ly/3hUBwHI
- Good quality.
- Strong and durable.
- The tool is simple and easy to use.
- Beautifully designed.
- Professional and technical.
- The slider could easily and lightly move.
- With a steel ball holder/retainer.
MKS MOSFET Heating Controller for 3D Printer heat Bed/Extruder
Ask for Latest offers/availability : https://bit.ly/3APytrd
The superior performance of MOSFET (Max 280A).
3. An extra large heat sink, the maximum current can be up to 30A or more.
4. Can use hot-bed output signal of Ramp1.4 and MKS series to control.
5. Can use the digital signal of 5-24v to control.SKU: PGI-00354349
3D Accessories, Prayog Blaster
NEMA17 4.2 kg-cm Stepper Motor (With Detachable 70 cm Cable)
Ask for Latest offer / Availability : https://bit.ly/3bQHjev
- Step Angle: 1.8 °
- Current: 1.2 A/Phase
- Holding Torque: 4.2 kg-cm
- Detent torque: 2.2 N.cm (Maximum)
- Lead Wires: 4
- Shaft diameter: 5 mm
Openpilot MINI CC3D Atom NANO CC3D Side Pin Flight Controller for FPV QAV250
Ask for Latest offers/availability : https://bit.ly/39KZpMR
This CC3D Atom is about half the size of the regular OpenPilot CC3D, but with the same functionality. Now you can get all the great features and functionality of the full sized CC3D flight controller board but at about 1/2 the size!SKU: PG676
Presall 3D Scanner Board Kit Ciclop Expansion Board
Ask for Latest offers/availability : https://bit.ly/2XSCMUj
- Supply Voltage: 12VDC.
- No. of motor drivers mounts: 2.
- Onboard Reset button.
- Thermal shutdown circuitry.
- Ground fault protection.
- Load short-circuit protection
3D Accessories, 3D Printer Accessories
RepRap MK2B 3D printers Dual Power PCB HeatBed With 14AWG Cable3D Accessories, 3D Printer Accessories
RepRap MK2B 3D printers Dual Power PCB HeatBed With 14AWG Cable
Ask for Latest offers/availability : https://bit.ly/3m9hGcH
- Dimensions (Outer): 214 x 214 mm.
- Dimensions (Heat Bed): 200 x 200 mm.
- Come with resistor and LEDs soldered, basic soldering skills needed to solder the power wire
- 2 layer, 35μm copper.
- Copper Plated Holes
- Very good in combination with RUMBA or Taurino Power.
- Power Input: 12V / 24V DC
- Weight: 190 gm.
Wanhao Duplicator i3 V2.1 3D Printer (Semi-Assembled)
Ask For Availability :- https://bit.ly/2K34eVp
- Model: WANHAO i3 V2.1
- Pre-assembled steel frame Prusa i3 you ever had.
- Fully open source enables you to use any most up to date software.
- Extra-long 45mm LM8UU bearings guide the extruder assembly for better lateral tracking.
- Compatible Software: Repetier (Opensource), CURA (Opensource), MatterControl (Opensource), Simplify 3D (Details)
- File Transfer: microSD Card & USB
- Frame Color: Steel Frame (Powder Coated Black)
- The Z-Axis endstop switch comes secured to a height-adjustable bracket allowing the freedom to choose between any of your favorite build
3D Accessories, Filaments
WANHAO White PLA 1.75 mm 1 KG Filament for 3D printer – Premium Quality
Ask for Latest offers/availability : https://bit.ly/3odC4Md
- High-quality starting material
- Diameter tolerances of ± 0.1mm checked with laser monitor
- Smooth surface with even rounding
- Lower melting temperature
- Good flow properties
- Little odor development
- Less risk of clogging the nozzle, compared to ABS
- Compatible with almost all 1.75mm FDM printers
- No heating bed necessary
- High quality means less waste
- Easy to use
- No heating bed necessary