Shop
Showing 1201–1224 of 1946 results
-
Gas Sensor
MQ-2 Smoke LPG Butane Hydrogen Gas Sensor Detector Module
Ask for latest offers/availability : https://bit.ly/2KMH1qJ
- Operating Voltage is +5V
- Can be used to Measure or detect LPG, Alcohol, Propane, Hydrogen, CO and even methane
- Can be used as a Digital or analog sensor
- The Sensitivity of Digital pin can be varied using the potentiometer
- Long life and low cost
- Simple drive circuit
SKU: PGI-009765 -
Arduino Sensors
MQ-3 Alcohol Detector Gas Sensor Module
Ask for Latest offer / Availability : https://bit.ly/3q4yR0l
- Power requirements: 5 VDC @ ~165 mA (heater on) / ~60 mA (heater off).
- Current Consumption: 150mA.
- DO output: 0.1 and 5V.
- AO output: 0.1- 0.3 V (relative to pollution), the maximum concentration of a voltage of about 4V
- Detecting Concentration: 0.05-10mg/L Alcohol.
SKU: PGI-0029770 -
Arduino Accessories, IR Sensor, Prayog Blaster
MQ-4 High Sensitivity Gas Methane (CNG) Detector Sensor Module
Arduino Accessories, IR Sensor, Prayog BlasterMQ-4 High Sensitivity Gas Methane (CNG) Detector Sensor Module
Ask for Latest offer / Availability : https://bit.ly/2Q9ejpP
- Detecting range: 300~10000ppm
- Signal output indicator.
- Dual Signal output (analog output and TTL output).
- The TTL output signal is low level, allows us to connect with SCM directly.
- Analog output 0~5V voltage.
- Quick response and recovery.
SKU: PGI-009773 -
Gas Sensor
MQ-5 Methane LPG Liquid Propane Gas Sensor Module
Ask for latest offers/availability : https://bit.ly/2S977rR
- Operating Voltage: 5V DC
- High sensitivity to LPG, natural gas, town gas.
- Small sensitivity to alcohol, smoke.
- Stable and long life.
- Simple drive circuit.
- Fast response.
SKU: PGI-009771 -
Gas Sensor
MQ-6 Liquefied Petroleum Isobutane Propane Gas Sensor module
Ask for latest offers/availability : https://bit.ly/2VBEuWg
- Operating Voltage: 5V DC
- Indication of the signal output
- Dual signal output (analog output, and TTL level output)
- 0 ~ 5V analog output voltage, the higher the concentration, the higher the voltage
- High sensitivity to hydrogen
- Can be resistant to ethanol steam, LPG (petroleum), smoke interference
- Has a long life and reliable stability
- Fast response and recovery characteristics
SKU: PGI-009772 -
Arduino Sensors, Prayog Blaster
MQ-7 CO Carbon Monoxide Coal Gas Sensor Module
Ask for Latest offer / Availability : https://bit.ly/3llU5o7
- Operating voltage: DC 5 V.
- The analog output voltage, the higher the concentration the higher the voltage.
- The carbon monoxide detection with better sensitivity.
- With a long service life and reliable stability.
- Rapid response and recovery characteristics.
- Range: 10 to 1000 ppm.
SKU: PGI-0044007 -
Gas Sensor
MQ-8 Hydrogen Gas Sensor Module H2 Alarm Detection
Ask for latest offers/availability : https://bit.ly/2S5KXa4
- Using high-quality dual-panel design, with power indicator and TTL signal output instructions.
- The switching signal having a DO (TTL) output and analog output AO.
- TTL output valid signal is low.
- The higher the voltage, the concentration of the analog output voltage is higher.
- A hydrogen gas detection with good sensitivity.
- Has a long life and reliable stability
SKU: PGI-0044008 -
Gas Sensor
MQ-9 Carbon Monoxide, Methane and LPG Gas Sensor Module
Ask for latest offers/availability : https://bit.ly/2W0BeCS
- Good sensitivity to CO/Combustible Gas
- High sensitivity to Methane, Propane, and CO
- Long life and low cost
- Simple drive circuit
- Input voltage: DC 5±0.2V
- Current Consumption: 150mA
SKU: PGI-0043970 -
Esp Wifi Module, IoT and Wireless
MT76813DBI ESP8266 Serial WIFI wireless Gain Antenna
Ask for Latest offer / Availability : https://bit.ly/3kX0yFZ
- Radome material: polyurethane
- Flexible cable
- Stable signal
- Best for indoor applications.
- Connector: IPX female to SMA-KY
- Frequency(Hz): 900/1800
- Gain: <3 dB
- VSWR: <1.5
SKU: PGI-0052699 -
Arduino Modules, Arduino Sensors
MT8870 DTMF Audio/Speech Decoding Telephone Module
- The MT8870 module is a low power device DTMF decoder chip. It is a complete DTMF receiver integrating both the band-split filter and digital decoding functions. This module is suitable for modem interfaces, mobile radios and other DTMF related applications.
SKU: PGI-00407537 -
Audio Module
MT8870 DTMF Audio/Speech Decoding Telephone Module
Ask for latest offers/availability : https://bit.ly/2ZxicHR
- The MT8870 module is a low power device DTMF decoder chip. It is a complete DTMF receiver integrating both the band-split filter and digital decoding functions. This module is suitable for modem interfaces, mobile radios and other DTMF related applications.
SKU: n/a -
Drone Frames, Quad Copter & Multi Rotors
Multi Rotor Air PCB Frame w/ High Landing Gear for FPV Quad-Copter
Drone Frames, Quad Copter & Multi RotorsMulti Rotor Air PCB Frame w/ High Landing Gear for FPV Quad-Copter
Ask For Availability :- https://bit.ly/2K4K7pY
- Model: S500.
- Frame Weight: 405gm
- Wheelbase: 500 mm
- Moter Mounting Hole Dia.: 3 mm
- Landing Gear Material: ABS
- Arm Size: 220 x 40 mm.
- Landing Gear Length: 200mm
SKU: PGI-00694694 -
Prayog Blaster
Multicolor Flat Ribbon Cable
Ask for Latest offer / Availability : https://bit.ly/3q9SPW3
- No. of Wire: 10.
- Color: Multicolor.
- Length: 1 Meter.
- Easily and directly inserted into PCB.
- Suitable for internal wiring in office equipment, audio, and video machines.
- Durable and reusable.
- Easy to install and use.
SKU: PGI-0028 -
-
-
-
E-Bike
MY1016 250WZ2 DIY Electric Bicycle Kit
Ask for Latest offer / Availability : https://bit.ly/3uTAd0d
- Kit of: 24 v 250 w motor
- 24 Volt DC Operation
- Permanent Magnet DC Motor
- Rated Load RPM: 400
- No Load Current: <2.2 Amps
- Rated Wattage: 250W (0.33 Horsepower)
- Torque: 8 N.m (80 kg-cm)
- Stall Torque: 40 N.m (400 kg-cm)
- Rated Current: 13.4 Amps
- Efficiency: 78%
- Reduction Ratio: 9.78:1
SKU: PGI-006619 -
-
N20 Motor without Encoder
N20 12V 140RPM Micro Metal Gear Motor With Encoder
Ask for Latest offer / Availability : https://bit.ly/3esWmvP
- Encoder Test Wire Length: 140mm.
- Wheel Dia.: 43 mm.
- Rated Voltage: DC 12V.
- Output Speed: 120RPM.
- Milling Edge: 0.5 mm.
- Output Shaft Size: 3 x 10mm.
- Output Shaft type: D type.
SKU: PGI-00475625 -
Encoder
N20 3V 150RPM Micro Metal Gear Motor With Encoder
Ask for Latest offer / Availability : https://bit.ly/3axhNcF
- Encoder Test Wire Length: 140mm.
- Wheel Dia.: 43 mm.
- Rated Voltage: DC 3V.
- Output Speed: 150RPM.
- Milling Edge: 0.5 mm.
- Output Shaft Size: 3 x 10mm.
- Output Shaft type: D type.
SKU: PGI-00476817 -
N20 Motor without Encoder
N20 3V 35RPM Micro Metal Gear Motor With Encoder
Ask for Latest offer / Availability : https://bit.ly/2Ucwjlu
- Encoder Test Wire Length: 140mm.
- Wheel Dia.: 43 mm.
- Rated Voltage: DC 3V.
- Output Speed: 35RPM.
- Milling Edge: 0.5 mm.
- Output Shaft Size: 3 x 10mm.
- Output Shaft type: D type.
SKU: PGI-00476766 -
N20 Motor without Encoder
N20 3V 75RPM Micro Metal Gear Motor With Encoder
Ask for Latest offer / Availability : https://bit.ly/3hP1wEg
- Encoder Test Wire Length: 140mm.
- Wheel Dia.: 43 mm.
- Rated Voltage: DC 3V.
- Output Speed: 75RPM.
- Milling Edge: 0.5 mm.
- Output Shaft Size: 3 x 10mm.
- Output Shaft type: D type.
SKU: PGI-00467815 -
N20 Motor without Encoder
N20 6V 150RPM Micro Metal Gear Motor With Encoder
Ask for Latest offer / Availability : https://bit.ly/2UQa9p5
- Encoder Test Wire Length: 140mm.
- Wheel Dia.: 43 mm.
- Rated Voltage: DC 6V.
- Output Speed: 150RPM.
- Milling Edge: 0.5 mm.
- Output Shaft Size: 3 x 10mm.
- Output Shaft type: D type.
SKU: PGI-00476675
