-28%

FlexiForce A101 Force Sensor


      Ask for latest offers/availability : https://bit.ly/3aJYOcD

  • The A101 is our smallest sensor can measure up to 10 lbs. The dynamic range of this mini force sensor can be modified by changing the drive voltage and adjusting the resistance of the feedback resistor
      Applications:
  1. Testing and Measurement Equipment
  2. Embedded Electronics
  3. OEM Development Kit
  4. Consumer Electronics
  5. Multimeter

715.00 999.00

The A101 is our smallest sensor optimized for high volume manufacturing and ideal for embedding into products. The 2-pin sensors are currently our smallest standard sensor.

The sensors can measure up to 10 lbs. The dynamic range of this mini force sensor can be modified by changing the drive voltage and adjusting the resistance of the feedback resistor

Applications:
  1. Testing and Measurement Equipment
  2. Embedded Electronics
  3. OEM Development Kit
  4. Consumer Electronics
  5. Multimeter

How to Adjust the Force Range:

In order to measure higher forces, apply a lower drive voltage (-0.5 V, -0.25 V, etc.) and reduce the resistance of the feedback resistor (1kΩ min.) To measure lower forces, apply a higher drive voltage and increase the resistance of the feedback resistor.

A101 circuit diagram

A101 Force Resistance Conductance Chart

Sensor resistance measured 20 seconds after applied load

Sensor was not attached to any drive circuitry


Typical Performance:

Linearity (Error): < ±3% of Full Scale (Line drawn from 0 to 50% load)

Repeatability: < ±2.5% (Conditioned Sensor, 80% of Full Force Applied)

Hysteresis: < 4.5 % of Full Scale (Conditioned Sensor, 80% of Full Force Applied)

Drift: <5% / logarithmic time (Constant Load of 25 lb (111 N))

Response Time: < 5 µsec (Time required for the sensor to respond to an input force; Impact load – recorded on Oscilloscope)

Operating Temperature: -40°C – 60°C (-40°F – 140°F)*

* Force reading change per degree of temperature change = 0.36%/ºC (±0.2%/ºF)


Package Includes:

1 x FlexiForce A101 Force Sensor

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “FlexiForce A101 Force Sensor”

There are no reviews yet.