A logic gate is an elementary building block of a digital circuit. Most logic gates have two inputs and one output. At any given moment, every terminal is in one of the two binary conditions low (0) or high (1), represented by different voltage levels. There are various types of logics are available like: AND logic, OR logic, etc. Here we have implemented two input one output AND logic. In this logic, the output is high only when both inputs are high, otherwise the output remains low. The give circuit is easy to understand. Two diodes are used here. We know that the turn conducts only when the anode is at lower voltage then cathode. If any one switch is on, then the diode corresponding to that switch conducts and voltage at v2 remains low. If both switches are off (open) then only the votlage at v2 goes to high and LED gets turn on.
AND Logic Implementation using Diodes
A logic gate is an elementary building block of a digital circuit. Most logic gates have two inputs and one output. At any given moment, every terminal is in one of the two binary conditions low (0) or high (1), represented by different voltage levels. There are various types of logics are available like: AND logic, OR logic, etc.
₹249.00 ₹499.00 incl. GST
Based on 0 reviews
Be the first to review “AND Logic Implementation using Diodes”
Related products
-
School & Engineering Projects, School Level Kits
Monostable multibivrator using transistor
Monostable Multivibrators or “One-Shot Multivibrators” as they are also called, are used to generate a single output pulse of a specified width, either “HIGH” or “LOW” when a suitable external trigger signal or pulse T is applied. This trigger signal initiates a timing cycle which causes the output of the monostable to change its state at the start of the timing cycle and will remain in this second state.
SKU: PGSK017 -
Mechanical Projects, School & Engineering Projects
Automatic street light controller with road power generation
Mechanical Projects, School & Engineering ProjectsAutomatic street light controller with road power generation
We have used a sensor called LDR which has the property to change its resistance according to the intensity of the light. As the intensity of light falling at the LDR increases, its resistance gets decreased and vice versa. Hence the total intensity of light remains constant.
It is one of the most recent power generation concepts. This device is engineered as a practical and useful alternative energy technology for generating clean electricity from the millions of vehicles on our roadways and utilizes this electrical energy efficiently when required.
SKU: PGME019 -
School & Engineering Projects, School Level Kits
Diode as a Reverse Current Blocking Element.
Diodes are semiconductor devices which allows the current through them only in one direction. The property has many applications in electronics devices. For example in AC to DC conversion, the diodes are used. It can also be used in protection circuits.
SKU: PGSK006 -
Mechanical Projects, School & Engineering Projects
Power Generation using See-Saw
Power generation using see-saw shows how energy can be tapped and used at a commonly used system. Due to urbanization, number of public parks and playgrounds are increasing day by day. A large amount of potential energy is available to be conserved into useful electrical energy to be used at the night.
There is great possibility of tapping this energy and generating power which can be used for the lamps in the playground areas and nearby application.
SKU: PGME021
There are no reviews yet.