Prayog Blaster
Showing 25–48 of 125 results
-
Arduino Accessories, Prayog Blaster
400 Tie Points Contacts Mini Circuit Experiment Solderless Breadboard
Arduino Accessories, Prayog Blaster400 Tie Points Contacts Mini Circuit Experiment Solderless Breadboard
Ask for Latest offer / Availability : https://bit.ly/306HNWW
- 400 tie points
- 2 Power lanes, Total 100 tie points in power lanes
- 1 Double strip, Total 300 tie points
- Perfect for Arduino shield prototyping and testing
- Plastic housing, metal contact clips
SKU: PGI-00498432 -
Prayog Blaster, Sensors
650nm 6mm 5V DC 5mW Mini Laser Dot Diode Module
Ask for Latest offer / Availability : https://bit.ly/3e0LOo8
- Output Power: 5mW
- Working Voltage: 5V DC
- Working temperature: -10 ℃~+40 ℃
- Housing material: Copper
- Working life: more than 2000 hours
- Spot mode: Dot Facula (continuous output)
- Laser wavelength: 650nm red-colored.
- Operating current: <40mA
- Power lead length: 120mm.
SKU: PGI-0016339 -
Prayog Blaster, Tyres & Wheels
6mm Shaft Dummy Motor wheel For Robotic chassis
Ask for Latest offer / Availability : https://bit.ly/3baIHZ5
- The clamp can be used to position DC motor anywhere on a solid flat surface making it very convenient to use for any customized product or device.
- They have been used regularly in automation robots in industries. It can be used for your project or competition Robot too.
SKU: PGI-0030 -
IC's, Prayog Blaster
74HC595 – 8-bit Serial-to-Parallel Shift Register (pack of 5)
- Contains an 8-bit Serial-In Parallel-Out Shift Register that feeds an 8-bit D-type Storage Register
- Shift Register has Direct Clear
- Accurate from Dc to 20MHz
- 3-State Outputs
- Standard TTL Switching Voltages
SKU: PGI-001090251 -
-
Connector, Prayog Blaster
9v Battery Snap Connector + DC Jack(Battery Connector Cap) – 2pcs
Ask for Latest offer / Availability : https://bit.ly/3c0QmbD
- Excellent material
- It is an environmental 9v battery buckle
- The Cable Length: 12cm Approx.
- Convenient for connecting a battery to your application.
- Save power and protect the environment
- Good electrical conductivity and comfortable sense of touch
SKU: PGI-0028684 -
Motors | Drivers | Actuators Categories, Prayog Blaster
A4988 driver Stepper Motor Driver- Good Quality
Motors | Drivers | Actuators Categories, Prayog BlasterA4988 driver Stepper Motor Driver- Good Quality
Ask for Latest offers/availability : https://bit.ly/3qv7v2n
- Low RDS (On) Output
- Automatic current decay mode detection / selection Mix with slow current decay modes
- Synchronous rectification for low power dissipation
- Internal UVLO, · Cross-current protection · 3.3 and 5 V compatible logic supply · Thermal shutdown circuitry · Ground fault protection · Load short-circuit protection
SKU: PGI-0060 -
Prayog Blaster
Advanced Kit for Arduino
Ask for Latest offer / Availability : https://bit.ly/3jwsGim
- All-in-one kit, a great starter kit for learning to code.
- Model Type: UNO Rev R3
- Microcontroller Chip: ATmega328
- Input Voltage(Recommended): 7-12V
- Operating Voltage: 5
- Analog I/O Pins: 6
- Digital I/O Pins: 14 (of which 6 provide PWM output)
SKU: PGI-0031816 -
Arduino Boards, Prayog Blaster
Arduino Uno R3 with Cable
Ask for Latest offer / Availability : https://bit.ly/2O6XPgI
- Micro-controller : ATmega328.
- Operating Voltage : 5V.
- Input Voltage (recommended) : 7-12V.
- Digital I/O Pins : 14 (of which 6 provide PWM output).
- Analog Input Pins : 6.
SKU: PGI-006337 -
Prayog Blaster
Basic Arduino DIY Innovation KIT (25 in 1 Economic KIT)
Ask for Latest offers/availability : https://bit.ly/30enE1n
- 25 in 1 DIY Innovation combo KIT
- Best Economic kit for Beginner students
- KIT Contains all Basic electronic Parts
- KIT Contains Arduino as well as some Basic Sensors
SKU: PGI-0038 -
-
Batteries, Prayog Blaster
Bonka 2200mAh 35C 3S1P 11.1V Lipo Battey for Drone/Quadcopter
Ask for Latest offers/availability : https://bit.ly/3bfDWgB- The 2200mAh Bonka Lithium Polymer battery has a voltage of 11.1V.
- The Bonka LiPo battery is integrated with a JST-XH balance plug and XT-60 discharge plug
- It is designed to have a Max Continuous Discharge of 35C and Max Burst Discharge of 70C
- The 11.1V 2200mAh Bonka LiPo battery packs are equipped with heavy duty discharge leads that is highly essential to minimize the resistance and sustain high current loads
- They help in powering Qaudcopter, DIY Drones, RC Cars, Health and Fitness devices and many more
SKU: PGI-0046 -
Batteries, Prayog Blaster
Bonka 5200mAh 35C 3S1P 11.1V Lipo Battery XT-60 Plug
Ask for Latest offers/availability : https://bit.ly/3e8Nagw
- The 5200mAh Bonka Lithium Polymer battery has a voltage of 11.1V.
- The Bonka LiPo battery is integrated with a JST-XH balance plug and T discharge plug.
- It is designed to have a Max Continuous Discharge of 35C and Max Burst Discharge of 70C.
- The 11.1V 5200mAh Bonka LiPo battery packs are equipped with heavy duty discharge leads that is highly essential to minimize the resistance and sustain high current loads.
- They help in powering Qaudcopter, DIY Drones, RC Cars, Health and Fitness devices and many more.
SKU: PGI-0047 -