SEEED STUDIO
Showing 1–24 of 45 results
-
ADVANCE CONTROLLER BOARD
Air602 WiFi Development Board
   Ask for latest offers/availability : https://bit.ly/2W1xceH
Interface
- USB interface
- UART/SPI
- Integrated GPIO device controller.
Wireless:
- Support IEEE802.11 b/g/e/i/d/k/r/s/w/n.
- Support 2.4~2.4835 GHz.
- Support Wi-Fi WMM/WMM-PS/WPA/WPA2/WPS.
- Support Wi-Fi Direct.
SKU: n/a -
Development Board
Grove – Arduino Beginner Kit (All-in-one Arduino Compatible Board)
    Ask for Latest offer / Availability : https://bit.ly/2Sqhze4
- Super friendly to beginner
- Suitable for Arduino beginners
- Suitable for STEAM teaching
- Suitable for getting started with open-source hardware and Arduino coding
SKU: PGI-766894 -
-
ADVANCE CONTROLLER BOARD
Pycom WiPy 2.0 WiFi-Bluetooth IOT Development Board
   Ask for latest offers/availability : https://bit.ly/2W1nIAh
- Manufacturer: Pycom
- Interface Type: I2C, I2S, SPI, UART
- Operating Supply Voltage:3.3 V to 5.5 V
- Frequency:2.4 GHz
- Protocol Supported:802.11 b/g/n
- Product Type: WiFi Development Tools
SKU: n/a -
-
ADVANCE CONTROLLER BOARD
Seeed Studio Wio Lite W600 ATSAMD21 Wireless Development Board
   Ask for latest offers/availability : https://bit.ly/2KWKXoy
- Micro Processor: SAM D21 ARM Cortex-M0+
- Input Supply voltage (V) : 3.3 ~ 5V (USB C type connector)
- Analog I/O: 6 Pins
- Digital I/O: 14 pins
- WiFi Module Supports: 802.11 b/g/n
SKU: n/a -
ESP WIFI MODULE
Seeedstudio ESP8285 Wi-Fi SoC Module
   Ask for latest offers/availability : https://bit.ly/3cVtY27
- The smallest 802.11b/g/n Wi-Fi SoC module
- Uses low power 32bit CPU and compatible with the application processor
- Main frequency up to 160MHz
- Built-in 10Bit high precision ADC
- Support UART/GPIO/PWM/ADC interface
- Integrate Wi-Fi MAC/BB/RF/PA/LNA
SKU: n/a -
Relay
SeeedStudio Grove 4 Channel Solid State Relay
   Ask for latest offers/availability : https://bit.ly/2zpgOvI
- Operating input voltage: 4~6V
- Rated Input Voltage: 5V
- Rated Load Voltage: 100 to 240 VAC 50/60 Hz
- Load Voltage Range: 75 to 264 VAC 50/60 Hz
- Load current: 0.1 to 2 A
- Leakage current: 1.5 mA max. (at 200 VAC)
SKU: n/a -
Kits & Projects
SeeedStudio Grove Beginner Kit for Arduino
Ask for latest offers/availability :Â https://bit.ly/371twzA
- Operating voltage: 5 V
- Tutorials for guidance
- Fully compatible with Arduino UNO
- High performance, low power 8 bit ATmega328 MU microcontroller
- Serial converter CP2102N chip (to communicate the Seeeduino with a computer by using a micro-USB cable)
- 2 on-board Grove connectors
- 14 Digital I/O Pins (6 PWM outputs)
- 6 Analog inputs
- ISP header
- Arduino UNO-R3 shield compatible
- Micro USB programming and power supply
- Supports Windows, Mac OS, and Linux
SKU: n/a -
ELECTRONIC SWITCHES/KEYPADS
SeeedStudio Grove Blue LED Button
   Ask for latest offers/availability : https://bit.ly/3ee3SrR Â
- Operating voltage: 3.3V/5V
- Press resistance: <100 mΩ
- Release resistance: >100 MΩ
- LED rated current: 50 mA
- Grove digital interface
- High switching speed
- Low power consumption
- Long operating life
SKU: n/a -
BIOMETRIC/ECG/EMG SENSOR
SeeedStudio Grove Capacitive Fingerprint Scanner
   Ask for latest offers/availability : https://bit.ly/2Kv9sZQ
- Built-in 2KByte storage: support up to 100 fingerprints
- Powerful self-learning function: the more you use, the more accurate the recognition
- Selectable security level
- Small size, low power consumption,10uA for standby mode
SKU: n/a -
School & Engineering Projects
SeeedStudio Grove Creator Kit – Alpha (20 in 1 Sensor Kit)
Ask for latest offers/availability : https://bit.ly/33QHgeA
- Carefully selected Grove sensors (input) and actuators (output)
- 20 different Grove modules in a kit
- All modules are packed in protective plastic bags
- Grove connector cables
- Comes with 107 colored pages printed book
- Compatible with:
i) Arduino, requires Grove Base Shield
ii) Raspberry Pi, requires GrovePi HAT
iii) micro:bit, requires BitMaker or BitMaker Lite
SKU: PGI-605383 -
IR AND PIR SENSOR
SeeedStudio Grove Human Presence Sensor (AK9753)
   Ask for latest offers/availability : https://bit.ly/2yy2rVF
- Quantum-type IR Sensor with Four IR Elements
- 16-bits Digital Outputs to I2C bus
- Integrated temperature sensor
- Interrupt Function
- Low Current Consumption
SKU: PGI-00672614 -
IR AND PIR SENSOR
SeeedStudio Grove Infrared Emitter
   Ask for latest offers/availability : https://bit.ly/2XVKRoW
- Operating voltage : 3.3V – 5V
- Operating temperature: -40°C to 80 °C
- Distance range: 10 meter (max)
- Peak wavelength : 940nm
- Angle of half intensity (ϕ) = ± 17°
- Radiant intensity : 72 mW/sr
- Grove compatible interface
- Plug and play
Â
SKU: PGI-00598684 -
School & Engineering Projects
SeeedStudio Grove Inventor Kit for micro:bit
Ask for latest offers/availability : https://bit.ly/34QoMtT
- Cool extension shield with rich and convenient peripherals
- 8 well selected Grove modules for working with micro:bit
- 12 awesome projects to let you get started quickly
- Well documented instruction set
- 4 Grove ports on Shield to cover different interfaces
- Edge connectors for crocodile clip and 4mm banana plugs
- On-board USB port to power up your micro:bit
SKU: PGI-602848 -
Light/Color Sensor
SeeedStudio Grove Light Sensor v1.2
   Ask for latest offers/availability : https://bit.ly/2VsANC9
- Operating voltage: 3 to 5 V
- Operating current: 0.5 mA to 3 mA
- Peak wavelength: 540 nm
- Quick response time
- Analog value output
- High reliability and sensibility
- Small footprint
SKU: n/a -
LINE SENSOR
SeeedStudio Grove Line Finder v1.1
Ask for latest offers/availability : https://bit.ly/2xGvTZv
- Working voltage (DC): 5 V
- Adjustable detecting range
- Comparator: LMV358
- Photo reflective diode: RS-06WD
- Digital output mode: TTL
- Includes a Grove 4 pin buckled connector cable
- Grove compatible interface
SKU: n/a -
LORA WIFI
SeeedStudio Grove LoRa Radio 433MHz
   Ask for latest offers/availability : https://bit.ly/2zP1s3W
- Using RFM95 module based on SX1276 LoRa®
- ~28mA(Avg) @+20dBm continuous transmit
- ~8.4mA(Avg)@standby mode
- ~20mA(Avg) @receive mode, BW-500kHz
- Simple wire antenna or MHF Connector for external high gain antenna
- +20dBm – 100 mW Power Output Capability
SKU: n/a