ARDUINO
Showing all 9 results
-
Arduino Boards
Arduino Portenta H7 Development Board
Ask for Latest offer / Availability : https://bit.ly/34uiwaW
- DUAL CORE – The PH7 has two processors in one, run parallel tasks in different languages
- SELECT ENCRYPTION – Choose between two vendors for the crypto-chip that better suits your case
- USB-C – Power your board, connect it to a display, or get it to work in OTG mode
- MEMORY RANGE – Select the right amount and type of memory for your application
SKU: PGI-800607 -
Prayog Blaster
Official Arduino Sensor Kit
Ask for Latest offer / Availability : https://bit.ly/3p3X8Sd
- Perfect Arduino starter kit for both classroom and online learning.
- No breadboard or other accessories are required.
- Suitable for teaching Arduino programming.
- Best all in one sensor kit for beginners.
SKU: PGI-00847232 -
Arduino Boards
Original Arduino Due Board
Ask for latest offers/availability : https://bit.ly/2yXbjEi
- A 32-bit core, that allows operations on 4 bytes wide data within a single CPU clock.
- CPU clock at 84Mhz
- 96KBytes of SRAM
- 512KBytes of flash memory for code
- A DMA controller, that can relieve the CPU from doing memory intensive tasks.
SKU: PGI-00648420 -
Arduino Boards
Original Arduino Mega 2560 ATmega2560 MCU Rev3
Ask for latest offers/availability : https://bit.ly/3bSwF4o
- Manufacturer: Arduino Official
- Official Arduino Board with 3-Month brand Warranty
- ATmega16U2 instead 8U2 as USB to serial converter
- Stronger RESET circuit
- 5V operating voltage
- 40mA DC current per I/O pin
- 256KB flash memory of which 8KB used by bootloader
- 8KB SRAM
- 4KB EEPROM
SKU: PGI-00638895 -
Arduino Boards
Original Arduino Micro without Headers
Ask for latest offers/availability : https://bit.ly/2VPeHdm
- Manufacturer: Arduino Officials
- Support TWI and SPI communication
- Input voltage (recommended) range from 7V to 12V
- Input Voltage (limit) range from 6V to 20V
- 20 digital input/output pins (of which 7 can be used as PWM outputs and 12 as analog inputs)
- Onboard ATmega32u4 microcontroller with 32KB flash memory, 2.5KB SRAM and 1KB EEPROM
SKU: PGI-00648419 -
Arduino Boards
Original Arduino Nano
Ask for latest offers/availability : https://bit.ly/3bNmyOa
- Manufacturer: Arduino Officials
- Operating Voltage (logic level): 5V
- 8 analog inputs ports: A0 ~ A7
- 14 Digital input / output ports: TX, RX, D2 ~ D13
- 1 pair of TTL level serial transceiver ports RX / TX
- Using Atmel Atmega328P-AU MCU
- There is a bootloader installed in it
- Standard 0.1” spacing DIP (breadboard friendly).
- Manual reset switch.
SKU: PGI-00648418 -
Arduino Boards
Original Arduino Uno Rev3
Ask for latest offers/availability : https://bit.ly/2z1qT1y
- Manufacturer: Arduino Officials
- Micro-controller : ATmega328P.
- Operating Voltage: 5V.
- Input Voltage (recommended) : 7-12V.
- Digital I/O Pins: 14 (of which 6 provide PWM output).
- Analog Input Pins: 6.
SKU: PGI-00648421 -
Arduino Boards
Original Arduino UNO WiFi REV2
Ask for latest offers/availability : https://bit.ly/2YlXVEA
- Microcontroller: ATMEGA4809
- Operating Voltage: 5V
- Input Voltage (recommended): 7-12V
- Digital I/O Pins: 14 (6 Provide PWM Output)
- PWM Digital I/O Pins: 6
- Analog Input Pins: 6
- DC Current per I/O Pin: 20mA
- DC Current for 3.3V Pin: 50mA
- Flash Memory: 48KB (ATMEGA4809)
- SRAM: 6,144KB (ATMEGA4809)
- EEPROM: 256 Bytes (ATMEGA4809)
- Clock Speed: 16MHz
SKU: PGI-00647962
